Parts

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.

A layer of gel across the top gives an additional level of relief to the Cite X Gel. It was designed for recreational riders who spend a half-day on the bike or less, ride nearly upright with lots of weight against the saddle, prefer the closest thing to a pillow or have significant lower back pain. A completely seamless, heavily contoured top with a large cutaway will hit and miss in all the right places. Shock-absorbing elastomers molded into the saddle base create the effect of springs without any mechanical devices. They also help eliminate vibrations from the road or surface that ordinarily get transferred straight to the spine. A durable synthetic top with rear graphics is easy to maintain and will look new for years. - Seamless synthetic cover with screen-printed graphics - Center cutaway with rear relief channel reduces contact points with soft tissue areas - Thin gel layer along the top of the saddle provides an additional level of comfort - Length x width: 249mm x 175mm - Weight: 454 grams; 16.0 ounces - Rails: satin steel

- High Performance Brake Pads - Disc Pad Material: Organic

Small parts for TRP hydraulic disc brake systems.

Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel

8-speed SIS compatible freewheel

• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams

Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.

• Lightweight aluminum construction • Back sweep: 6 degrees

- Standard replacement cantilever/v-brake bosses

- Dual-compound TPR construction with dual-alloy lock-on clamp - Ergonomic Grip shape for extended comfort - Length: 140mm

- Dual-compound TPR construction with dual-alloy lock-on clamps - Ergonomic Grip shape for extended comfort - Length: 130mm

- Forged alloy body and cage - Chromoly spindle - Toe clip compatible (clips included) - 504g pair - 9/16-inch spindle

Lightweight aluminum construction with a versatile riser bar design.

- Steel 1/2 x 3/32 derailleur chain - For use with index shifting systems - For 7-/8-speed drivetrains - 300 grams - 132-link chain is extra long for bicycles like foot-forward-design cruisers

- Replacement fat bike bottom bracket with square-taper chromoly spindle - Sealed bearings - Steel shell and cups - 120mm shell width - 180mm spindle length - 1.37" x 24T English thread

- Fits cantilever brakes - Sold individually

- E-Bike-compatible 7/8-speed chain with Diamond Hard Coating which reduces wear and increases surface hardness - 4-edged chamfered outer plates and inclined bridge provide improved shifting characteristics - Deep inner waist chamfer ensures quiet operations - Sub-punched pins for increased tensile strength

Shimano Altus M2000 Series 9-speed cassette. Combinations: - 11 – 32T: 11-13-15-17-19-21-24-28-32T (bo) - 11 – 34T: 11-13-15-17-20-23-26-30-34T (bn) - 11 – 36T: 11-13-15-17-20-23-26-30-36T (bw)

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

The Shimano Altus RD-M310 rear derailleur is a quality, durable replacement rear derailleur for 7 and 8-speed drivetrains. - 13t upper and 15t lower pulleys - Maximum cog size: 34t - Total capacity: 43t

- MODEL NO: CS-HG41-7 - SERIES: SHIMANO - Combination: 11-13-15-18-21-24-28T (ac) - Combination name(Group name): 11-28T (ac) - Compatible chain: IG/HG - Speeds: 7-speed - Type: HG

Shimano's Deore-level 10-speed Chain offers excellent power transfer and top-notch durability. It showcases a mud-shedding design and Shimano's directional design with engineered inner and outer plates for smooth, fast and precise shifting.

Shimano Saint hydraulic disc brakes feature an opposed ceramic 4-piston design which helps absorb rotor heat and reduce vibrations. The Servo Wave 2-finger levers feature tool-free stroke and position adjustment, while the one-way bleeding caliper and hinged lever clamp offer easy installation and maintenance. - Brakes are pre-bled for convenient installation - Includes metal ICE TECH pads with radiator fins - I-spec B-type shift lever compatible

Shimano STEPS E8000 chainrings are specially designed for STEPS drivetrain systems. - For use with E-Bike rear derailleur system compatible chain - Chainring for 53mm chain line

Shimano's Tiagra Rear Derailleur GS (10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: RD-4700-GS - Series: Tiagra - Cassette Compatibility: 10 - Maximum Sprocket: low sprocket: 34T / top sprocket: 12T (front double) / 20T low sprocket: 32T / top sprocket: 12T (front triple) - Minimum Sprocket: low sprocket: 28T / top sprocket: 11T (front double) / 20T low sprocket: 25T / top sprocket: 11T (front triple) - Maximum Front Difference: 16T (front double) / 20T (front triple) - Total Capacity: 39T (front double) / 41T (front triple)

Shimano's Ultegra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the meticulously engineered inner and outer plate chamfers that are specifically designed to accommodate the unique requirements of a moving chain. And, the plates are perforated to trim precious grams. - Weight: 267g

The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence. - Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - Cassette Body Type: Shimano Micro Spline - Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51 - Drivetrain Speeds: 12 - Range: 10-51